MARKING1012
| Part number | Manufacturer | Package | Pins | Category |
|---|---|---|---|---|
| EPC1012 | — | EPC-4 | 4 | Enhancement Mode eGaN Power FET |
| LT1012S8 | Linear Technology | S8 | 8 | Picoamp Input Current, Microvolt Offset, Low Noise Op Amp |
| SZ1012 | — | SMA | 2 | 1.0W 12V Zener Diode |
| ZXCT1012DAATA | — | TDFN-5 | 5 | Reduced height micro-power current monitor |
| ZXCT1012ET5TA | — | TSOT-23-5 | 5 | Reduced height micro-power current monitor |
| AT42QT1012-MAH | Atmel | UDFN2X2-8 | — | QTouch 1-Button Sensor IC with Power Management Functions |
| AT42QT1012-TSHR | Atmel | SOT-23-6 | — | QTouch 1-Button Sensor IC with Power Management Functions |
Markings easily confused with 1012
Worn markings, blurry photos and similar letterforms make these codes the ones most often misread. Check them one by one.
Other markings in the same package (EPC-4)
3 marking codes are recorded for this package; the most common are listed here.
Other markings from Atmel
62 marking codes are recorded for this manufacturer; the most common are listed here.